5 Common 2016 Jeep Wrangler Problems (Cause And Fix)

It must be fretting if you are having problems with your Jeep Wrangler 2016. This vehicle is indeed ideal for off-road driving. But owners face problems with this vehicle from time to time. However, the problems have a quick solution. 

But what are the 2016 Jeep Wrangler problems? The most common Jeep Wrangler 2016 problems are engine oil leaks, the engine won’t start, the gearbox won’t shift to the 4th gear, a bad powertrain, and the airbag keeps flashing. You need to change particular parts to fix these problems.

Further, I will discuss the causes of the 2016 Jeep Wrangler problems, the step-by-step guide to fix these problems, and their solutions. Keep reading. Also, explore the 2004 Jeep Wrangler Problems.

How To Fix A 2016 Jeep Wrangler Problems?

The Jeep Wrangler owners have lodged the most common problems on the NHTSA website regarding this vehicle. Fixing the problems is not that hard. I have given an overview of the cause and fix of the problems can be divided into the following categories:

Problems	Cause	Fix
Engine oil leak	Loosed oil filter	Change the oil filter
The engine won’t start	Faulty battery	Change the battery
Gearbox not shifting to the 4th gear	Fractured shifter assembly	Replace the shifter assembly
Bad powertrain	Damaged torque converter	Replace the torque converter
Airbag keeps flashing	Damaged clockspring	Change the clockspring

What Are The Causes Of 2016 Jeep Wrangler Problems?

The 2016 Jeep Wrangler problems are caused by several issues. Before fixing these problems, you need to thoroughly recognize the cause of the problem. Then it becomes easier for you to work on the fix accordingly.

I have listed the causes of Jeep Wrangler problems and discussed them elaboratively with step-by-step solutions. Please have a look below-

Loosed oil filter

The 2016 Jeep Wrangler may have a loose oil filter that is causing the engine to leak oil. 

Usually, it occurs when you mount an incorrect-size oil filter in the engine mount. The incorrect size of the oil filter can gradually get detached from the engine mount. Thus the oil filter leaks oil.

The solution is to get a perfect size of oil filter and removed the old filter from the system. However, an engine can leak oil due to the lack of maintenance too. Check the engine oil comparison here.

Fix: Replace the oil filter

Step 1: Park your vehicle on a flat-level surface 

Step 2: Find out the location of the oil filter and loosen the filter 

Step 3: Drain the oil by placing a container underneath

Step 4: Remove the oil filter completely

Step 5: Now, install a new oil filter in the system. Do not overtighten the filter

Step 6: Finally, you’re done

Faulty battery

A dead battery will stop your Jeep Wrangler 2016 from starting. The battery can get dead when the alternator is not working properly. A malfunctioning alternator cannot charge the battery. It will result in no charge in the battery. Hence, the vehicle will keep dying and won’t start. 

However, a battery that has got old, can also be a reason behind the car not starting. Whatever the cause is, replacing the alternator will fix this issue.

Fix: Replace the alternator

Step 1: Disconnect the negative battery terminal

Step 2: Remove the belt and wiring harness

Step 3: Disconnect the electronic connectors

Step 4: Take off the alternator using a socket wrench

Step 5: Install a new alternator in the system

Step 6: Reconnect belts and wiring harness

Step 7: Reconnect the connectors and battery terminal

Fractured shifter assembly

The shifter assembly can get bad over time. Due to excessive use, they become worn out and get clogged with dirt. It may cause your 2016 Jeep Wrangler SUV to have shifting problems.

The owners have made several complaints that their gearbox is not shifting to the 4th gear. It is absolutely caused by the fractured shifter assembly. 

Fix: Replace the shifter assembly cable

Step 1: Park your vehicle on a flat-level surface

Step 2: Disconnect the cable shifter from the transmission

Step 3: Disconnect the cable from the gear lever

Step 4: Attach the new cable 

Step 5: Test the cable by moving the gearbox 

Damaged torque converter

Your 2016 Jeep Wrangler may have a bad powertrain due to the damaged torque converter. 

A bad or damaged torque converter cannot transfer force to the axle. If the axle is not getting force, the powertrain stops working. The torque converter gets damaged when there is immoderate friction with the road. 

Fix: Change the torque converter

Step 1: Park your vehicle on a flat-level surface

Step 2: Detach the transmission from the vehicle

Step 3: Loosen the driveshaft bolts and disconnect the drive shaft from the rear axle

Step 4: Remove the old torque converter 

Step 5: Place the new torque converter in the system

Step 6: Reconnect back everything

Damaged clockspring

Your Jeep Wrangler 2016 can have an airbag flashing problem due to the damaged clockspring. The airbag clockspring can get worn out over time. It creates a bad connection with the vehicle. As a result, the airbag light flashes on. To fix this problem, you need to change the damaged clockspring.

Fix: Change the damaged clockspring

Step 1: Turn off the engine

Step 2: Disconnect the battery’s negative terminal

Step 3: Take off the steering wheel

Step 4: Find out the location of the clockspring

Step 5: Once you find it out, disconnect the electrical connectors

Step 6: Remove the damaged clockspring

Step 7: Install the new clockspring in the system

Step 8: Reconnect back everything

Is The 2016 Jeep Wrangler Reliable?

The 2016 Jeep Wrangler is a good SUV for forests trails and mountains. A lot of websites have different reliability scores for this vehicle. The J.D. Power website has consumer ratings of 73 out of 100 for this vehicle.

Edmund has a rating of 4.4 out of 5 for this vehicle. The website cars.com has 4.5 ratings out of 5 for this vehicle. These websites have rated this vehicle in below average to average reliable scores. 

Although this vehicle is very good for off-road driving, due to its high cost and fewer features, consumers have given fewer ratings to this vehicle. Hence, it is not that reliable. 

So, you can consider buying this vehicle, if you need a SUV with high speed. Compared to the other vehicles, this vehicle is too costly. Ultimately, the choice is yours whether it matches your preference or not. Learn the 1993 Jeep Wrangler problems

FAQs

Here I have answered the most common questions asked by the owners of Jeep Wrangler regarding this vehicle. Please check out to learn the answers below-

Q. Is Jeep Wrangler 2016 Long-lasting? 

Yes. The Jeep Wrangler 2016 is a long-lasting SUV. It has a lifespan of 10-15 years. It can go almost 280,000 miles with proper maintenance. 

Q. What Is The Cost Of Jeep Wrangler 2016? 

The average price of the Jeep Wrangler 2016 is $28,995. 

Q. Is Jeep Wrangler 2016 High Maintenance? 

No. The Jeep Wrangler 2016 is not so costly to maintain based on the user’s opinions. It takes around $784 to $800 to maintain a Jeep Wrangler 2016.

Conclusion

2016 Jeep Wrangler owners face a lot of problems with their vehicles from time to time. But it is quite usual and can be fixed if not delayed. 

The 2016 Jeep Wrangler has a lot of mechanical issues such as a loosed oil filter, faulty battery, fractured shifter assembly, damaged torque converter, and damaged clockspring. 

These problems were the most faced issues complained about by the owners. However, you may wait for the recall to fix these problems or do it yourself. And if it is not possible, then take your vehicle to a good auto mechanic. They will solve your 2016 Jeep Wrangler problems professionally.