Deep Creep Vs PB Blaster: Which One Should I Use?
When dealing with metal parts, rust can cause them to become stuck and difficult to separate. This is where penetrating oil/lubricant can be helpful. By penetrating into rust and breaking it down, it can effectively loosen the stuck parts.
Two popular options for penetrating oil are Deep Creep and PB Blaster, both of which are effective in their own ways. The two work fairly fast to loosen a stuck bolt saving you time and effort. However, there are some differences between the two that users may prefer one over the other.
Keep reading to find out more about these differences and similarities and to help you choose the best option for your needs.
Quick Comparison Between Deep Creep and PB Blaster
The following table covers some facts about Deep Creep and PB Blaster penetrating
| Facts | Deep Creep | PB Blaster |
| Manufacturer | Sea Foam International | Blaster Corporation |
| Materials | Highly refined petroleum | Petroleum distillates and Chlorine. |
| Effectiveness | High | High |
| Odor | Mild Gasoline-like smell | Stronger distinct smell |
| Price | $8 – $20 | $6 – $20 |
| Container | Can | Can |
What Is Deep Creep?
Deep Creep is a premium-grade penetrating oil and lubricant by Sea Form International, a US-based company manufacturing and selling various fuel additives. The oil is made using a gentle petroleum-based formula. This product is VOC compliant.
This penetrating oil has many uses and can be used to oil various parts, including;
- Gears
- Bushings
- Hinges
- Rollers
- Slides
- Gun parts.
Deep Creep can also be used as a cleaner. It can clean various car parts, including the carburetor.
Why Use Deep Creep?
Following are various reasons you may prefer to use Deep Creep penetrating oil and lubricant.
1. Highly Penetrative
Deep Creep is usually categorized as a penetrative product and penetrates tiny spaces and crevices. These penetrative abilities enable it to reach deep parts and dissolve rust and other grime.
The high-penetrative formula used to make Deep Creep is usually superior to that of most other products making this product better.
2. Breaks Stubborn Contaminants
As mentioned earlier, Deep Creep is petroleum-based and has oils that help dissolve stubborn contaminants and grease. This quality makes it effective as a cleaner, enabling it to tackle difficult cleaning jobs that soap water cannot do alone.
3. Non-Corrosive
Deep Creep doesn’t contain any harsh chemicals that can corrode metal parts. It doesn’t contain silicone or chlorinated solvents, which can cause or accelerate corrosion. This fact makes it ideal for use in various tools, including guns, where corrosion can cause malfunctions.
4. Fast
Thanks to its fast-acting formula, Deep Creep loosens stuck nuts and dissolves grime quickly. Its high-penetrative ability also allows it to reach deep parts of metal quickly and begin dissolving the grim and dirt.
Sea Foam International claims that Deep Creep starts working within minutes. For a stuck bolt, you can feel it loosen within 15-30 minutes and can be less depending on the metal type and rust severity.
5. Displaces Moisture
Another advantage of Deep Creep penetrating oil is that it has moisture displacement properties. Moisture displacement is ideal as it prevents corrosion by keeping moisture from contacting the metal, which usually starts rust and corrosion.
Deep creep oil and lubricant can also protect the metal from galvanic corrosion, which usually happens between dissimilar metals. A contact between the two metals results in an electric current that corrodes either of the two.
Deep Creep forms a thin layer on the surface of the metal preventing moisture and contact between the two metals. Since the oil is highly penetrative, this layer is formed all along the metal parts preventing future corrosion.
What is PB Blaster?
PB, polybutadiene, Blaster is a professional-grade penetrating catalyst by Blaster Corporation. It is a US-based manufacturer of penetrants, lubricants, and rust inhibitors. The oil is formulated using various petroleum-based oils and solvents.
PB Blaster is usually used in most mechanical and other needs, including.
- Loosening Nuts
- Loosening Bolts
- Spark Plugs
- Rusted plumbing pipes
- Can prevent squeaking and rust.
PB Bluster is known to be effective in loosening tough bolts where one would have ended up using cheater bars or heating with a torch.
Why Use PB Blaster?
Following are some cons of using PB Blaster and some reasons why the oil may be a good choice.
1. Trusted by Many
Blaster Corporation has been around for a long time, and its products are widely used and trusted. Most mechanics of both the 20th and 21st centuries use these products in various jobs, including brake and suspension system jobs.
The first PB Blaster product was actually made to help penetrate and loosen mining equipment that couldn’t separate due to corrosion. The product continues to perform outstandingly and has the trust of most professionals, including mechanics.
2. Tough on Corrosion
PB Blaster contains small amounts of chlorine, which is tough on corrosion and helps break up rust. This quality makes it ideal when loosening a stuck bolt or nut that other products cannot.
However, on the flip side, too much use of the PB Blaster may end up causing corrosion on these parts afterward.
3. Fast
Like Deep Creep, PB Blaster is also first in dissolving rust and grim, allowing you to work on the part soon. Some tests also show the PB Blaster penetrating oil creeping upwards on a stuck bolt and loosening it.
The product begins working within the first few minutes, which is also what the manufacturers state. The bolt may start to loosen as soon as 15 minutes have elapsed, especially the tough ones. However, vertical or heavily rusted or corroded bolts may take longer
4. PB Blaster Has Other Uses Too
Like most penetrating oils, including Deep Creep, PB Blaster has other uses besides loosening nuts and bolts from parts. This penetrating oil can be used as a cleaner, cleaning various vehicle parts.
PB Blaster can also be used as a degreaser, removing grease, oils, and other contaminants from various vehicle parts. This product can also work as a lubricant to reduce friction and prevent rust. However, it is best to use it limitedly due to the chlorine in PB Blaster.
Deep Creep Vs PB Blaster: Which One Should I Use?
Both penetrating oils are usually effective in loosening the bolts, making it hard to choose between them. However, you can base your decision on various factors, including;
1. Odor
It’s better to use Deep Creep if planning to use the lubricant indoors as it smells less. However, like in any other instance, ensure the room is well-ventilated.
PB Blaster smell can be strong, which varies with the person. However, in one instance, it caused residents in Springbrook Nursing and Rehabilitation Center to begin evacuating Because it seemed to smell like a gas leak, according to CBS17.com.
2. Price
You can also base your choice on the product’s price, especially if you’re working on a large project that will require multiple cans. Go with the cheaper PB Blasters if you’re on a tight budget.
However, the price may vary with the store you buy it in and your location. You may also get a discount when purchasing in bulk from some retailers.
3. Corrosion
You can base your choice on the possibility of the penetrative oil causing corrosion. As mentioned earlier, Deep Creep doesn’t contain harsh metals that can cause corrosion on metal.
PB Blaster contains chlorine which can react with various metals, like copper, brass, and aluminum, causing corrosion. PB Blaster may not be the better choice if applying penetrative oil on any of these metals.
Bottom Line
If you’re having trouble with stuck bolts or parts, Deep Creep and PB Blaster are two reliable penetrants to consider. They are effective and work fast to loosen the stuck part, saving you money, time, and effort.
Although they have many similarities, they also have unique qualities that set them apart. If you’re unsure which one to use, the article lists several factors to help you make an informed decision.
